Every pathway and stone in a garden requires a solid place to sit on. If it does not have this secure place, it can move underfoot or slip out of place. One way to establish that solid base is through the use of sand. Sand is an element that will hold things in place if it is properly applied as a solid foundation.
The first step in the process is to define the area in which the pathway is going to be laid down. You will need to mark out the area with either spray paint or chalk. This is the area that will need to be dug up for the placement of the sand in Hartford, CT. The area is determined by the design of the stonework and where the pathways are going to run through. Since sand can conform to any configuration, there is no need to stick with straight lines.
The next step is to determine how much sand is needed for the walkway. Usually, there needs to be at least two to three inches of sand laid down for stability purposes. So, you need to figure out the approximate area of the pathway. If it is hard to calculate based on the design, it is better to order more sand than is needed because you can use this sand in other landscaping projects.
After the sand is laid down and leveled, it is compacted into the hard stable substance that will support the stones. A compacting machine is essential at this juncture because it will apply the right pressure to the sand to compress it into an even layer. This step cannot be done by hand because the force will not be strong enough to supply that stable surface for the stones to rest on. More sand is added if it is needed to fill in the area.
Sand is a popular choice for setting landscaping stones. You can find all the sand that you need for your landscaping project at Dunning Sand and Gravel. Once you have the sand in place, all that is left is to put the stones in their proper place.